Dane techniczne:
HÖRAUF BDM COMPACT 45
Year 2010
Speed 2700 covers/hour
Counter: 26 million covers
Has an additional device for cutting in one pass for use on covers and spine
Has the possibility of gluing a mirror in the second pass.
Thickness 90 – 150 g/m2 (laminated)
Thickness of the leatherette cover material: 0.1 – 0.3 mm
Cardboard thickness
• Minimum: 1.5 mm
• Maximum: 4 mm
• Possibility of using cardboard with foam with the following parameters:
• Maximum cardboard 1.5 mm – foam 3 mm
• Minimum cardboard 1.5 mm – foam 2 mm
Book cover format range
• Height: minimum 100 mm, maximum 390 mm
• Width: minimum 170 mm, maximum 660 mm
• Burning:
9mm – bobbin spine – 2mm and 2.5mm cardboard
10mm – bobbin spine – 3mm cardboard
11mm – cardboard spine – 2mm and 2.5mm cardboard
12mm – cardboard spine – 3mm cardboard
• cardboard slitter x 1
• equipment for the production of three-part (suspended) covers in two production runs x 1
• equipment for the production of one-part, suspended covers, allowing for gluing a mirror in the second production run x 1
• matrix carrier sheet x 10
• rubber blanket in a roll 10 meters x 600 mm wide x 1
• double-sided adhesive tape for gluing the matrix to the sheet x 2
• device for cutting corners x 1
• device for cutting to the leading edge of the rubber mat of the matrix x 1
• device for stretching and trimming the rubber matrix on the carrier sheet x 1
• vacuum pump x 1
• set for off-line pre-cutting of cardboard

Rok produkcji: 2010


Cena: na zapytanie

Możliwość zobaczenia maszyny: tak

📞 [+48 790 228 233]
📧 [tech@2press.pl]

Zapraszamy do kontaktu!

Dodaj odpowiedź